Universal Steel of America can design and price your metal building system to increments of the nearest 1/16 of an inch and to comply with most common building codes. Each is designed by professional, experienced engineers and manufactured to exacting tolerances under rigid quality controlled plant conditions. Call us today to explore your Accessory options at 1-800-993-4660 or Contact Us
Walk Doors are a galvanized 16-gauge frame embossed door leaves, bonderized with one coat of bronze primer.
Full Glass Doors
PDL doors are specifically designed for fast installation. You just uncrate, set in place, plumb and square, then anchor.
Thermal Efficient Windows
Thermal Efficient Windows are 1/2" thick double glazed, aluminum alloy with bronze acrylic enamel finish.
Univents are gravity-type 10' long, 9" or 12" throat, 26-gauge units with or without dampers, designed for continuous runs.
Roof Jack are mountable DuraRib paneling that can hold shingle stacks between 7" and 12". Roof Jacks are used to withstand and shield venting duct pipe from attic ventilation and bath and kitchen fans.
Monovents are gravity ventilators that are mounted to a building’s peak where the natural movement of air can provide consistent ventilation throughout the building’s interior. Monovents are typically 20", circular, 26-gauge, and equipped with dampers to regulate air flow.
Pipe Flashes are flexible pieces that make the process of flashing pipes cleaner, easier, and more efficient. Pipe Flashes can be used on pipes with diameters anywhere between 1/4" and 7".
Curbs are custom built to accommodate roof mounted equipment.
Louvers are window blinds or shutters with adjustable horizontal slats. An 18-gauge frame has louvers of 48" x 48" with 20-gauge blades and a bird screen.
Industrial Steel Buildings
Agricultural Steel Buildings
Metal Garage Buildings & Shops
Commercial Steel Buildings
Steel Barn Buildings
Religious Steel Buildings
Steel Airplane Hangars
Steel Building Homes
Steel Storage Buildings
Boat & RV Storage